Print cheap stickers and labels
We print stickers and labels for you in many different formats and designs. Depending on the selected product, free forms and special formats are also possible. You can perfectly configure your labels as address labels or bottle labels. Thanks to a wide range of variants, the stickers can also be used as price tags for packaging and products.
Classic stickers are just perfect for plaques or badges. With your logo or a smart catchphrase, they are of course also suitable as advertising material. In addition, you can use labels and stickers to seal post parcels or mark and label product packaging. Benefit from the variety of formats and print24.com will print labels and stickers that perfectly match your requirements!
Design & print round, oval or rectangular stickers: FreeDesign tool with design templates
Design stickers and labels in various formats
Various standard formats are available for printing your stickers. The smallest, selectable format are stickers in 20 x 20 mm with rounded corners. The A3 stickers (297 x 420 millimetres) provide you with the maximum available size. In between, all common formats from A8 to A4 are possible. We can also print DIN-long (105 x 210 mm) stickers for you.
An elegant variant are stickers with rounded corners. Round stickers with a diameter of 40 or 80 millimetres and oval stickers are ideal for creating plaques or badges. Special formats are possible as well. At print24.com you can print labels in round, square, oval, rectangular, special formats and free forms. 20 x 20 millimetre labels are very popular. They are perfect for pricing labels, whilst 60 x 80 millimetres are ideal for address labels. A total of ten different standard formats from 20 x 20 to 280 x 500 millimetres are available.
When selecting the format, remember to add three millimetres of bleed to the print file for labels and two millimetres for stickers. For round and oval stickers, it is best to plan for 2.5 millimetres of bleed.
Stickers delivered on sheets
A sticker sheet is used to place several individual stickers together on one sheet. Whether rectangular, round, oval or freeform, there are almost no limits to the format choice.
All formats are delivered on either A4 sheets or A3 sheets. Depending on the format, the stickers are shipped as follows (selection for A4)
- 20 x 20 mm - 96 labels
- 37 x 52 mm - 25-labels
- 50 x 20 mm - 36-labels
- 70 x 25 mm - 10-labels
- 85 x 55 mm - 10-labels
- 50 mm round - 15 labels
- 80 mm round - 6-labels
- 145 x 95 mm oval - 3-labels
Note: Please create your print file with 3 mm bleed on each side to be trimmed.
Adhesive labels can be printed on a roll from 50 labels or more.
Labels on rolls
From 50 pieces we deliver your labels on rolls with a core diameter of 76 millimetres. The print points outwards. There is a distance of 4 millimetres between the individual printed labels.
Our large labels are suitable for packaging, but can only be produced in portrait format, with the narrow side of the label roll at the front. We offer all other stickers in both landscape and portrait format on the label roll, with the exception of the 145 x 95 millimetre format (landscape format only).
High-quality materials for your sticker and label printing
Various paper variants are available for stickers and labels. All paper types are suitable for machine and manual dispensing!
Felt-marked plain paper
Our 90 gsm plain paper is permanently adhesive and has a natural white, uncoated, structured surface. It is moisture-resistant and fungicide treated. It has been specially developed for labelling wine bottles and is also suitable for use on a slightly damp and cold glass. Even during longer storage periods, no mould will form on the label. Good resistance even in ice buckets. The adhesive paper is suitable for indoor use and storage areas with climatic changes.
Note: This material is not suitable for applications in direct contact with food. Not resistant to oils and chemicals!
Have labels printed made from grass paper
Grass Paper (The Green Label®)
The carrier material is made of siliconized glassine on one side, the upper material consists of grass. The green-yellow 95 gsm grass paper is permanently adhesive and has a rough, very haptic, grained surface. It is suitable for various product labels such as food labels, organic products, cosmetic products, bottle labels and environmental packaging. For all smooth surfaces used indoors. Only limited resistance to water, liquids and chemicals.Note: This material is FSC® certified, BfR (German Federal Institute for Risk Assessment) and FDA (US Food and Drug Administration) 175.105 approved and therefore suitable for applications that come into direct contact with dry and non-fatty foods!
Adhesive film (white)
The film consists of 60 µm / 45 gsm polypropylene (PP), it is permanently adhesive, surface-coated, smooth, glossy, robust and has a mother-of-pearl appearance. It is particularly suitable for labelling cosmetic products, chemical containers and household cleaners. But also for glass containers, beverage cans and jars (for all smooth surfaces). The film is therefore ideal for all labels that should have a certain resistance to water, oils, liquids and chemicals. It has excellent resistance to environmental influences.
Note: this film is not suitable for applications with direct food contact!
Adhesive film (Transparent)
This transparent film, made of 59 µm / 54 gsm polypropylene (PP), is surface-coated, smooth, transparent, glossy, robust and permanent adhesive. It is often underprinted with white to ensure perfect colour printing. The transparent film is particularly suitable for labelling cosmetic products, product labels for chemicals, household cleaners or glass and cans (for all smooth surfaces). With its excellent resistance to environmental influences, the film is ideal for all labels that should have a certain resistance to water, oils, liquids and chemicals.
Note: this film is not suitable for applications with direct food contact!
Adhesive paper neon
The 80 gsm FSC®-certified paper, which adheres permanently even on rough surfaces, has a matt surface in the colours fluorescent red, fluorescent yellow and fluorescent green. It is particularly ideal for eye-catching labels such as price labels and hazard labels. The paper is suitable for all indoor and short outdoor labels. No resistance to water, oils, liquids and chemicals.
Note: this material is not suitable for applications in direct contact with food!
Recycling white (The green label®)
Both the front material and the backing material are made from 100% post-consumer waste without chlorine bleach. The permanently adhesive 80 gsm FSC®-certified recycled kraft paper has a white, smooth, lightly coated matt surface. It is ideal for various product labels such as food labels, organic products, cosmetics, bottle labels, environmental packaging - also for all smooth surfaces. It is suitable for all labels that are intended for indoor use or short outdoor use, as only limited resistance to water, oils, liquids and chemicals are given.
Note: this material is suitable for applications that have direct contact with dry and non-fatty food! The adhesive complies with Regulation (EC) No. 1935/2004 of the European Parliament, the LFBG and recommended by BfR XIV (Institute for Risk Assessment) for food contact materials and the US Food and Drug Administration FDA 21 CFR 175.105.
Adhesive paper, removable, white Standard
The 80 gsm PEFC certified paper is removable and has a smooth, slightly glossy coated surface. It is suitable for a variety of product labels where good initial adhesion is required, such as cartons, PE films, steel, glass and almost all smooth surfaces. Indoor use. No resistance to water, oils, liquids and chemicals.
Note: this material is not suitable for applications that come into direct contact with food!
Adhesive paper, white Standard
The 80 gsm PEFC certified paper is extra permanent adhesive and has a smooth, slightly glossy coated surface. It is ideal for product labels such as shipping labels, food labels, stickers and bottle labels. But also for glass containers, beverage cans and jars (for all smooth surfaces). The paper is suitable for all labels that are indoors or for short outdoor use. No resistance to water, oils, liquids and chemicals.
Note: This material is suitable for applications that come into direct contact with dry and non-fatty foods.
Adhesive paper, opaque white Standard
The 80 gsm FSC® certified paper with a dark back coating is permanently adhesive and has a smooth, slightly glossy coated surface with high opacity. It is ideal for opaque labelling such as the over-glueing of existing articles and packaging, e.g. in the food sector. Suitable for indoor use or short outdoor use. Not resistant to water, oils, liquids and chemicals.
Note: This material is suitable for applications that come into direct contact with dry and non-fatty foods.
Cutting and punching of individual label shapes
Dependent on the chosen format, we die-cut or trim your stickers after printing. The stickers are delivered either as single stickers or in sheets. We print your labels on a tape. You have the choice of whether the products are printed with the narrow or wide side at the front. The labels are wrapped in such a way that the printed image points outwards.
Modern printing processes and quality colours
We print your stickers depending on your selection 1-colour in black or with the CMYK four-colour process. With CMYK you can also realise photos or other graphics as stickers. With the help of digital printing plate exposure (high-tech-CTP), we can achieve excellent printing results in the offset process. We also print your labels in 1-colour black or CMYK. As a standard, the surface is finished with UV protective varnish after printing. This increases the scratch resistance of the labels and your designs are optimally protected from scratches.
If you would like a preview of your labels and stickers, we can create a digital preview at the screen proof and store it in your user account. We are very flexible when it comes to choosing the quantities. We can print as little as one item and can create a maximum of 50,000 stickers and up to 10,000 labels per print job for you.
FAQ for product stickers
1. How are the stickers delivered?
The stickers are sent as follows, depending on the format:
- 50 x 20 mm (rounded corners)
- 70 x 25 mm (rounded corners)
- 85 x 55 mm (rounded corners)
- 37 x 52 mm
- 40 mm (round)
- 80 mm (round)
- 145 x 95 mm (oval)
All formats listed here are delivered on A4 sheets (maximum). All other sticker formats are delivered as single die-cut stickers. Order here!
2. Do the stickers feel more like paper or foil?
Adhesive paper (MC white) is used for the indoor area, which is more like paper and has similar properties (easier to tear). For outdoor use, permanent self-adhesive white film (polypropylene) is used. As the name suggests, it feels more like film (smooth) and is tear-resistant, which allows it to be used outdoors. Order here!
3. What do you mean by "permanently adhesive"?
Adhesive paper and film are "permanently adhesive". This means that they cannot be easily removed and may leave residues on the surface when removed. Order here!
4. How can adhesive residues from stickers be removed?
Glue residues can often be successfully removed with household remedies such as soapy water or vinegar. Alternative ways to remove adhesive residues are benzine or special adhesive removers. Although these aids are very effective, caution should be exercised as they can also attack the surfaces.
5. Is the adhesive for stickers vegan?
The adhesive used for adhesive paper and film is vegan.
6. Why does it make sense to round off the corners of stickers?
This minimises the risk of the corner areas becoming detached from the surface.
7. How can stickers be removed from the backing material?
Our stickers have a slotted reverse side, which can be removed from the carrier material by folding it.
8. Can I attach stickers to the glass from the inside?
No, but the product "Adhesive films" makes this possible.
9. Are the stickers temperature resistant?
The bonding temperature is between 5 °C and 40 °C and the operating temperature is between -40 °C and 80 °C (short-term 100 °C).
10. Are the stickers water soluble/wipeable?
The adhesives are water-based and dissolve in a water bath after prolonged immersion. Therefore, especially adhesive paper semigloss should not be wiped off. The PP film, on the other hand, is less sensitive.
With print24.com you can rely on the perfect combination of high-quality printing and fair prices if you want to have your stickers or labels printed. By the way: If you are looking for other print products that help you keep order, you will also find address labels, bottle labels and sticky notes.